 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Radiometrix Hartcran House, 231 Kenton Lane, Harrow, HA3 8RP, England Issue 5, November 2004 Tel: +44 (0) 20 8909 9595, Fax: +44 (0) 20 8909 2233 TXM-433 UHF Radio Telemetry Transmit Module The TXM-433-5 and TXM-433-10 integrate a low power FM UHF radio transmitter on a small module. Together with the matching RX2-433-14 or RX2-433-40 receiver a oneway radio data link can be achieved over a distance up to 200 metres on open ground. TXM-433-10 transmitter (back & front view) Typical features include: CE Certified by independent Notified Body Verified to comply with harmonised radio standard ETSI EN 300 220-3 and EMC standard ETSI EN 301 489-3 by accredited Test Laboratory PCB Mounting, space saving SIL style SAW controlled wide band FM transmission High data rates, 5kbps and 10kbps versions Analogue or Digital data input Wide supply range 2.7V-4.0 or 6.0V-9.0V @ <17mA The transmitter modules are most commonly employed in Wireless Security systems. The transmitter and the matching receiver (RX2) are approved to harmonised radio standard ETSI EN 300 220-3 and EMC standard ETSI EN 301 489-3. The TXM and RX2 modules will suit one-to-one and multi-node wireless links in applications including car and building security, EPOS and inventory tracking, remote industrial process monitoring and computer networking. Because of their small size and low power requirements, both modules are ideal for use in portable, battery-powered applications such as handheld terminals. Typical applications include :- Domestic and commercial security Guard patrol / lone worker protection Medical Alert / Nurse Call systems Mobile panic attack Computer networking Remote industrial process monitoring Data transfer through hazardous environments Lighting control, Garage door openers Fire alarms Picture / antique protection alarms Remote control, Access control Radiometrix Ltd, TXM Data Sheet page 1 Brief description The TXM-418 is designed to work with the matching receiver (SILRX-418). With the addition of simple antenna the pair may be used to transfer serial data up to 200m. The range of the radio link is very variable and depends upon many factors, principally, the type of antenna employed and the operating environment. The 200m quoted range is a reliable operating distance over open ground using 1/4 whip antenna at both ends of the link at 1.5m above ground. Smaller antenna, interference or obstacles (e.g. building etc.) will reduce the reliable working range (down to 30m in extreme cases). Increased antenna height, slow data or a larger receive antenna will increase the range (our best is 3km). We recommend that the module evaluation kit, EVAL-418-A, can be used to assess the reliable working range under the anticipated conditions of use. figure 1: TXM's block diagram figure 2: mechanical dimensions Pin Description pin 1 pin 2 pin 3 pin 4 pin 5 RF GND RF OUT Vcc Vss DATA IN This pin should be connected to the ground plane against which the integral antenna radiates. It is internally connected to pin 4 . Connects to the integral antenna. Output impedance is 50. Positive supply , supply voltages from +6V to +9V may be used. 0V connection for the modulation and supply. Should be driven directly by a CMOS logic device running on the same supply voltage as the module. Radiometrix Ltd, TXM Data Sheet page 2 Performance data TXM-433-5 Absolute Maximum Ratings: Supply voltage Vcc pin 3 Modulation input pin 5 Operating temperature Storage temperature Performance Data: ambient temperature: supply voltage: test circuit: Parameter Operating supply range (Vcc) Supply current, Vcc = 6.0V Vcc = 9.0V Radiated power (ERP) Vcc = 6.0V Vcc = 9.0V 20C +8.0V, unless noted otherwise figure 3 Min 6.0 3.0 5.0 -16 -13 Typical 6.0 10.0 -10 -8 Max 9.0 10.0 17.0 -7 -5 Units V mA mA dBm dBm Notes 1 1 2 3 4 4 5 -0.7V -0.7V to + 12V to + 9V -10 C to + 55 C -40 C to + 100 C Transmit frequency (Frf) Initial frequency accuracy Overall frequency accuracy Spurious radiation FM deviation (+/-) Modulation Bandwidth (-3dB) analogue Modulation digital pulse width 418.00 / 433.92 MHz -80 +80 kHz -95 +95 kHz Meets the EN300 220-1 standard 15 25 40 kHz DC 10 kHz 100 s Notes 1. Module on 50mm square ground plane, helical antenna 2. Supply 6V to 9V, temp -10C to +55C. 3. <-54 dBm in bands 41-68, 87.5-118, 162-230 & 470-862 MHz <-36 dBm else where below 1GHz , <-30dBm above 1GHz 4. Standard modulation: 2kHz square wave, 0 to Vcc 5. High or Low pulse. figure 3: TXM 5kbps version test circuit Radiometrix Ltd, TXM Data Sheet page 3 Performance data TXM-418-10 and TXM-433-10 Absolute Maximum Ratings: Supply voltage Vcc pin 3 Modulation input pin 5 Operating temperature Storage temperature Performance Data: ambient temperature: supply voltage: test circuit: Parameter Operating supply range (Vcc) Supply current,Vcc = 2.7V Vcc = 4.0V Conducted power in to 50 , Vcc = 2.7V Vcc = 3.6V Transmit frequency (Frf) Initial frequency accuracy Overall frequency accuracy Spurious radiation FM deviation (+/-) Modulation Bandwidth (-3dB) analogue Modulation digital pulse width 20 C 3.0V, unless noted otherwise figure 4 Min 2.7 3.0 5.0 Typical 3.2 6.0 10.0 -5 0 433.92 0 0 25 Max 4 13.0 17.0 Units V mA mA dBm dBm MHz kHz kHz kHz kHz s Notes 1 1 1 2 3 3 4 -0.7 -0.7 -40C to to -10C to + 6V + 13V to + 55C + 100C -85 -95 15 DC 50 +85 +95 40 20 - Notes 1. Supply 2V to 3.6V, temp -10C to +55C. 2. <-54 dBm in bands 41-68, 87.5-118, 162-230 & 470-862 MHz <-36 dBm else where below 1GHz , <-30dBm above 1GHz 3. Standard modulation: 2kHz square wave, 0 to Vcc 4. High or Low pulse. Radiometrix Ltd, TXM Data Sheet page 4 figure 4: TXM 10kbps version test circuit figure 5: Typical performance curves The TXM-UHF transmitter requires only a data modulation input, supply, ground and an antenna. Power supply requirements * The module will operate over the range 6V to 9V and is typically powered by either 9 Volt 'PP3'. * The module is not reverse polarity protected. Reverse supply voltages higher than 2V will cause damage and must therefor be externally protected against. Modulation requirements * The TXM-UHF transmitter has a DC to 10kHz modulation bandwidth and will accept direct analogue (AFSK) or digital data. A modulation low-pass filter (10kHz @ -6dB, 1st order) is use internally. * Although the modulation bandwidth of the transmitter extends down to DC as does the AF output of the receivers, it is not possible to pass data with a DC component due to frequency errors & drifts between the transmitter and receiver. Frequency differences between the transmitter and receiver will produce a DC offset error which causes the data slicer in the receiver module to give errors on long high or low pulses which exceed the maximum pulse width, see the receiver's data sheet for more detailed information. Radiometrix Ltd, TXM Data Sheet page 5 * Data Input, pin 5, is normally driven directly by CMOS logic levels from a data encoder IC. There is a wide range of encoder/decoder IC's available which may be used with the modules: MM57C200, 57410 National Semiconductor UM3750 UMC HT12 series Holtek MC14026 Motorola AS2787 Austria Systeme International GmbH * The encoder normally being run on the same supply voltage as the transmitter. Analogue drive eg. 2 tone FSK, is also possible, the pk to pk level should be between 5V and 9V peak to peak and must not drive pin 5 below 0V. There will be some 2nd harmonic distortion due to the varactor modulator (typ. <15%), this may be reduced if necessary by predistortion of the analogue waveform Antenna requirements Three types of integral antenna are recommended and approved for use with the module: A) Helical: Wire coil, connected directly to pin 2, open circuit at other end. This antenna is very efficient given it's small size (20mm x 4mm dia.). The helical is a high Q antenna, trim the wire length or expand the coil for optimum results. The helical de-tunes badly with proximity to other conductive objects. A loop of PCB track tuned by a fixed or variable capacitor to ground at the 'hot' end and fed from pin 2 at a point 20% from the ground end. Loops have high immunity to proximity de-tuning. This is a wire, rod ,PCB track or combination connected directly to pin 2 of the module. Optimum total length is 17cm (1/4 wave @ 418MHz) Keep he open circuit (hot) end well away from metal components to prevent serious de-tuning. Whips are ground plane sensitive and will benefit from internal 1/4 wave earthed radial(s) if the product is small and plastic cased B) Loop, C) Whip Antenna selection chart A helical ** ** *** ** 80m B loop * * ** *** 50m C whip *** *** * * 120m Ultimate performance Easy of design set-up Size Immunity proximity effects Range open ground to similar antenna The antenna choice and position directly controls the system range. Keep it clear of other metal in the system, particularly the 'hot' end. The best position by far, is sticking out the top of the product. This is often not desirable for practical/ergonomic reasons thus a compromise may need to be reached. If an internal antenna must be used try to keep it away from other metal components, particularly large ones like transformers, batteries and PCB tracks/earth plane. The space around the antenna is as important as the antenna itself. Radiometrix Ltd, TXM Data Sheet page 6 0.5 mm enameled copper wire close wound on 3.2 mm diameter former RF 433 MHz = 24 turns A. Helical antenna Feed point 15% to 25% of total loop length RF-GND C2 C3 C4 C1 track width = 1mm 4 to 10 cm inside area 2 RF B. Loop antenna 16.4cm wire, rod, PCB-track or a combination of these three RF C. Whip antenna 433 MHz = 16.4 cm total from RF pin. figure 6: Antenna configurations Duty Cycle requirements The duty cycle is defined as the ratio, expressed as a percentage, of the maximum transmitter "on" time on one or more carrier frequencies, relative to a one hour period. Where an acknowledgement message is required, the additional transmitter "on" time shall be included. There is a 10% duty cycle restriction on 433.050-434.790 MHz band in most of the EU member states. The TXM-433 is a RF module intended to be incorporated into a wide variety of applications and finished products, Radiometrix has no control over the end use of the TXM-433.The harmonised band 433.050 to 434.790 MHz as detailed in Annex 1 Band E of CEPT/ERC Recommendation 70-03 (which can be downloaded at http://www.ero.dk/scripts/docmanag98/dm.dll/QueryDoc?Cat=Recommendation) has list of countries where Duty Cycle restriction apply. Module users should, therefore, ensure that they comply with the stated Duty Cycle requirements of the version of CEPT/ERC Recommendation 70-03 in place at the time of incorporation of the TXM-433 into their product. It should be noted that the stated Duty Cycle must not be exceeded otherwise any approval granted for the TXM-433 will be invalidated. Radiometrix Ltd, TXM Data Sheet page 7 Ordering information The following are standard: TXM-433-5 RX2-433-14-5V RX2-433-40-5V SILRX-433-5 TXM-433-10 RX2-433-14-5V RX2-433-40-5V SILRX-433-10 5kbps data rate Transmitter 14kbps data rate matching Receiver 40kbps data rate matching Receiver 5kbps data rate matching Receiver 10kbps data rate Transmitter 14kbps data rate matching Receiver 40kbps data rate matching Receiver 10kbps data rate matching Receiver 3V versions of the RX2 receivers are available and should be ordered with a -3V suffix on the part number. (e.g. RX2-433-14-3V is set-up for 3V to 4V operation) All modules are available in a 418MHz version for UK use. All Radiometrix's products are designed and manufactured in England + Radiometrix Ltd, TXM Data Sheet page 8 CE Certificate of TXM and its variants Radiometrix Ltd, TXM Data Sheet page 9 Notes Radiometrix Ltd, TXM Data Sheet page 10 Radiometrix Ltd Hartcran House 231 Kenton Lane Harrow, Middlesex HA3 8RP ENGLAND Tel: +44 (0) 20 8909 9595 Fax: +44 (0) 20 8909 2233 sales@radiometrix.com www.radiometrix.com Copyright notice This product data sheet is the original work and copyrighted property of Radiometrix Ltd. Reproduction in whole or in part must give clear acknowledgement to the copyright owner. Limitation of liability The information furnished by Radiometrix Ltd is believed to be accurate and reliable. Radiometrix Ltd reserves the right to make changes or improvements in the design, specification or manufacture of its subassembly products without notice. Radiometrix Ltd does not assume any liability arising from the application or use of any product or circuit described herein, nor for any infringements of patents or other rights of third parties which may result from the use of its products. This data sheet neither states nor implies warranty of any kind, including fitness for any particular application. These radio devices may be subject to radio interference and may not function as intended if interference is present. We do NOT recommend their use for life critical applications. The Intrastat commodity code for all our modules is: 8542 6000 R&TTE Directive After 7 April 2001 the manufacturer can only place finished product on the market under the provisions of the R&TTE Directive. Equipment within the scope of the R&TTE Directive may demonstrate compliance to the essential requirements specified in Article 3 of the Directive, as appropriate to the particular equipment. Further details are available on The Office of Communications (Ofcom) web site: http://www.ofcom.org.uk/radiocomms/ifi/licensing/licensing_policy_manual/ Information Requests Ofcom Riverside House 2a Southwark Bridge Road London SE1 9HA Tel: +44 (0)845 456 3000 or 020 7981 3040 Fax: +44 (0)20 7783 4033 information.requests@ofcom.org.uk European Radiocommunications Office (ERO) Peblingehus Nansensgade 19 DK 1366 Copenhagen Tel. +45 33896300 Fax +45 33896330 ero@ero.dk www.ero.dk |
Price & Availability of RX2-433-14-5V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |